Aller au contenu 
Tableau des tailles commerciales des conduits en PVC
On this page, you can find common PVC conduit sizes, including trade sizes for common PVC pipe in North America, Australia, South America, and Asia, in both inches and millimeters.
NEC Code for USA
| Numéro d'article | Taille | OD | ID | Épaisseur | |||
| Inches | mm | Inches | mm | Inches | mm | ||
| SCH40-A | 1/2 | 0.840±0.004 | 21.34±0.10 | 0.578 | 14.68 | 0.109 | 2.77 |
| SCH40-B | 3/4 | 1.050±0.004 | 26.67±0.10 | 0.780 | 19.81 | 0.113 | 2.87 |
| SCH40-C | 1 | 1,315±0.005 | 33.40±0.13 | 1,004 | 25.50 | 0,133 | 3,38 |
| SCH40-D | 1-1/4 | 1.660±0.005 | 42.16±0.13 | 1.335 | 33.90 | 0.140 | 3.56 |
| SCH40-E | 1-1/2 | 1,900±0,006 | 48.26±0.15 | 1.564 | 39.72 | 0.145 | 3.68 |
| SCH40-F | 2 | 2.375±0.006 | 60.32±0.15 | 2.021 | 51.33 | 0.154 | 3.91 |
| SCH40-G | 2-1/2 | 2.875±0.007 | 73.02±0.18 | 2.414 | 61.31 | 0.203 | 5.16 |
| SCH40-H | 3 | 3.500±0.008 | 88.90±0.20 | 3.008 | 76.40 | 0.216 | 5.49 |
| SCH40-1 | 3-1/2 | 4,000±0.008 | 101.60±0.20 | 3.486 | 88.54 | 0,226 | 5.74 |
| SCH40-J | 4 | 4.500±0.009 | 114.30±0.23 | 3.961 | 100.60 | 0.237 | 6.02 |
| SCH40-K | 5 | 5.563±0.010 | 141.30±0.25 | 4.975 | 126.36 | 0.258 | 6.55 |
| SCH40-L | 6 | 6.625±0.011 | 168.28±0.28 | 5.986 | 152.04 | 0.280 | 7.11 |
| SCH40-M | 8 | 8.625±0.011 | 219.07±0.28 | 7.853 | 199.47 | 0.322 | 8.18 |
| Numéro d'article | Taille | OD | ID | Épaisseur | |||
| Inches | mm | Inches | mm | Inches | mm | ||
| SCH80-A | 1/2 | 0.840±0.004 | 21.34±0.10 | 0.502 | 12.75 | 0.147 | 3.73 |
| SCH80-B | 3/4 | 1.050±0.004 | 26.67±0.10 | 0.698 | 17.72 | 0.154 | 3.91 |
| SCH80-C | 1 | 1,315±0.005 | 33.40±0.13 | 0.91 | 23.11 | 0.179 | 4.55 |
| SCH80-D | 1-1/4 | 1.660±0.005 | 42.16±0.13 | 1.227 | 31.16 | 0.191 | 4.85 |
| SCH80-E | 1-1/2 | 1,900±0,006 | 48.26±0.15 | 1.446 | 36.72 | 0.200 | 5.08 |
| SCH80-F | 2 | 2.375±0.006 | 60.32±0.15 | 1.881 | 47.77 | 0.218 | 5.54 |
| SCH80-G | 2-1/2 | 2.875±0.007 | 73.02±0.18 | 2.25 | 57.15 | 0.276 | 7.01 |
| SCH80-H | 3 | 3.500±0.008 | 88.90±0.20 | 2.82 | 71.62 | 0.300 | 7.62 |
| SCH80-I | 3-1/2 | 4,000±0.008 | 101.60±0.20 | 3.28 | 83.31 | 0.318 | 8.08 |
| SCH80-J | 4 | 4.500±0.009 | 114.30±0.23 | 3.737 | 94.91 | 0.337 | 8.56 |
| SCH80-K | 5 | 5.563±0.010 | 141.30±0.25 | 4.713 | 119.71 | 0.375 | 9.53 |
| SCH80-L | 6 | 6.625±0.011 | 168.28±0.28 | 5.646 | 143.41 | 0.432 | 10.97 |
| SCH80-M | 8 | 8.625±0.011 | 219.07±0.28 | 7.513 | 190.83 | 0.500 | 12.7 |
| Numéro d'article | Taille | OD (inch) | Thickness(inch) | Longueur |
| DB120RC-A | 1 | 1.315±0.005 | 0.060 | 10ft/20ft |
| DB120RC-B | 1-1/2 | 1.900±0.006 | 0.060 | 10ft/20ft |
| DB120RC-C | 2 | 2.375±0.006 | 0.077 | 10ft/20ft |
| DB120RC-D | 3 | 3.500±0.008 | 0.118 | 10ft/20ft |
| DB120RC-E | 3-1/2 | 4,000±0.008 | 0.136 | 10ft/20ft |
| DB120RC-F | 4 | 4.500±0.009 | 0.154 | 10ft/20ft |
| DB120RC-G | 5 | 5.563±0.010 | 0.191 | 10ft/20ft |
| DB120RC-H | 6 | 6.625±0.011 | 0.227 | 10ft/20ft |
CEC Code for Canada
| Numéro d'article | Taille du commerce | Metric Size | Diamètre extérieur (mm) | ID (mm) | Épaisseur |
| DB2RC-A | 2 | 53 | 57.00 | 50.80 | 2.02 |
| DB2RC-B | 3 | 78 | 82.35 | 76.20 | 2.40 |
| DB2RC-C | 3-1/2 | 91 | 94.50 | 88.40 | 2.60 |
| DB2RC-D | 4 | 103 | 106.85 | 100.10 | 3.06 |
| DB2RC-E | 4-1/2 | 116 | 121.20 | 114.30 | 3.20 |
| DB2RC-F | 5 | 129 | 134.35 | 126.35 | 4.00 |
| DB2RC-G | 6 | 155 | 159.10 | 149.75 | 4.20 |
| Numéro d'article | Taille | OD | ID | ||
| Inches | mm | Inches | mm | ||
| ENT-A | 1/2 | 0.840 | 21.34 | 0.602 | 15.29 |
| ENT-B | 3/4 | 1.050 | 26.67 | 0.804 | 20.42 |
| ENT-C | 1 | 1.315 | 33.40 | 1.029 | 26.14 |
| ENT-D | 1-1/4 | 1.660 | 42.17 | 1.360 | 34.55 |
| ENT-E | 1-1/2 | 1.900 | 48.26 | 1.590 | 40.39 |
| ENT-F | 2 | 2.375 | 60.36 | 2.047 | 51.99 |
| ENT-G | 2-1/2 | 2.866 | 72.80 | 2.469 | 62.70 |
AS/NZS 3000 & IEC for Rest Countries
| Code des produits | Taper | Diamètre extérieur (mm) | Thickness(mm) |
| HFHDR20 | Ø20 | 20.0 | 2.3-2.6 |
| HFHDR25 | Ø25 | 25.0 | 2.5-2.8 |
| HFHDR32 | Ø32 | 32.0 | 2.7-3.0 |
| HFHDR40 | Ø40 | 40.0 | 3.1-3.4 |
| HFHDR50 | Ø50 | 50.0 | 3.4-3.9 |
| HFHDR63 | Ø63 | 63,0 | 3.9-4.5 |
| HFHDR65 | Ø65 | 75.5 | 3.9-4.5 |
| HFHDR80 | Ø80 | 89.1 | 4.6-5.3 |
| HFHDR100 | Ø100 | 114.5 | 5.9-6.7 |
| HFHDR125 | Ø125 | 140.4 | 7.2-8.1 |
| HFHDR150 | Ø150 | 160.5 | 8.3-9.3 |
| Code des produits | Taper | OD | ID |
| HFHDC20 | Ø20 | 20±0.3 | 12.7 |
| HFHDC25 | Ø25 | 25±0.4 | 16.5 |
| HFHDC32 | Ø32 | 32±0.4 | 22.0 |
| HFHDC40 | Ø40 | 40±0.4 | 28.3 |
| HFHDC50 | Ø50 | 50±0.5 | 36.0 |
| HFHDC63 | Ø63 | 63±0.6 | 46,0 |
Want to Know More About?
FAQ
We are definitely manufacturer, and we do exporting directly.
Usually our MOQ for conduit is 5000 meters. But we may accept lower quanity for your trial order, according to different situations. Please feel free to discuss with us.
Yes,OEM and ODM available. Please contact us to discuss details.
Yes, free samples can be provided with freight collect.
For existing sample, it takes 2-3 days. For customizing sample, need to confirm based on detailed situation.
Usually 15-30 working days.
T/T 50% deposit before production, and balance to be paid before delivery.